1. Уводзіны
Thank you for choosing PAUTIX 5V USB COB LED Strip Lights. This manual provides essential information for the safe and efficient use of your LED strip lights. Please read these instructions carefully before installation and operation.
Змест пакета:
- 1 x PAUTIX 5V USB COB LED Strip Light (6.56ft / 2m, 3000K Warm White)
- 1 x RF Wireless Remote Control
- 1 x USB Power Cable with In-line 3-button Dimmer
Image: Contents of the PAUTIX LED strip light package, showing the coiled strip, USB cable with in-line dimmer, and RF remote control.
2. Інфармацыя па бяспецы
- Сертыфікавана UL: This product is UL-Listed, ensuring compliance with safety standards.
- Нізкі абtage: Operates on 5V DC, making it safe to touch for pets and children.
- Толькі для выкарыстання ў памяшканні: The LED strip has an IP30 rating and is designed exclusively for indoor environments. Avoid exposure to water or high humidity.
- Крыніца харчавання: Use only with a 5V/2A (or higher) USB power source. Insufficient power may cause flickering or improper operation.
- Ўстаноўка: Ensure the mounting surface is clean, dry, and smooth for optimal adhesive performance.
- Рэзка: The strip can be cut at designated marks (every 12mm/0.47in). Cutting at non-marked points will damage the circuit.
- Цяпло: While COB LEDs produce minimal heat, ensure proper ventilation when installed in enclosed spaces.
3. Настройка і ўстаноўка
- Падрыхтуйце паверхню: Clean the desired mounting surface thoroughly to remove dust, oil, or moisture. A clean, dry, and smooth surface ensures strong adhesion.
- Вымераць і адрэзаць (неабавязкова): If a shorter length is required, measure the desired length and cut the LED strip only at the designated cutting marks (indicated by copper pads).
Image: Diagram showing the cuttable sections of the LED strip, marked every 12mm/0.47in, with a pair of scissors indicating where to cut.
- Адклейваемая падкладка: Carefully peel off the protective film from the 3M self-adhesive backing on the LED strip.
- Attach the Strip: Press the LED strip firmly onto the prepared surface, ensuring even contact along its entire length.
Image: Four-step visual guide demonstrating how to install the LED strip: clean the surface, peel the backing, paste the strip, and turn on the light.
- Падключыце харчаванне: Plug the USB connector of the LED strip into a compatible 5V/2A (or higher) USB power source (e.g., TV USB port, computer, power bank, USB wall adapter).
Image: Various USB power sources compatible with the PAUTIX LED strip, including a USB charger, power bank, laptop/TV, 5V battery pack, and USB socket.
4. Інструкцыя па эксплуатацыі
RF Wireless Remote Control:
The included RF remote control allows for convenient operation from a distance, even without direct line of sight (360° control). It features:
- Укл/Выкл: Уключыць або выключыць святло.
- Рэгуляванне яркасці: Increase or decrease brightness (5 levels).
- Функцыі таймера: Set the lights to turn off automatically after 30 minutes, 1 hour, 2 hours, 3 hours, or 4 hours. Press 'C' to cancel the timer.
- Функцыя памяці: The lights will restore to their last brightness setting when turned back on.
Image: The PAUTIX LED strip light coiled with the RF wireless remote control and USB power cable visible. The remote shows buttons for power, brightness, and timer settings.
Image: A child sleeping with the LED strip lights providing soft illumination, illustrating the timer function of the RF remote control.
In-line 3-button Dimmer:
The USB power cable includes an in-line controller with three buttons for basic operation:
- Кнопка харчавання: Turns the lights on/off.
- Brightness Up (+): Павялічвае яркасць.
- Brightness Down (-): Памяншае яркасць.
Image: A living room scene with LED strip lights installed, showing the in-line dimmer and its buttons for adjusting brightness from 10% to 100%.
5. Тэхнічнае абслугоўванне
- Уборка: Gently wipe the LED strip with a dry, soft cloth if it accumulates dust. Do not use liquid cleaners or immerse in water.
- Клей: The 3M adhesive is strong. If repositioning is necessary, do so carefully to avoid damaging the strip or the surface.
- захоўванне: Калі святлодыёдная стужка не выкарыстоўваецца працяглы час, захоўвайце яе ў прахалодным, сухім месцы, удалечыні ад прамых сонечных прамянёў.
6. Выпраўленне непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Святло не гарыць. | Няма харчавання, дрэннае падключэнне, няспраўны USB-порт. |
|
| Мігцяць агні. | Недастатковае харчаванне. |
|
| Не працуе пульт дыстанцыйнага кіравання. | Battery issue, interference. |
|
| Sections of the strip are not lighting up. | Damage to the strip. |
|
7. Тэхнічныя характарыстыкі
- мадэль: RF-SWW320COB-USB-2M-3000K-NEW
- Марка: ПАЎТЫКС
- Тып крыніцы святла: COB LED
- Каляровая тэмпература: Цёплы белы 3000K
- Даўжыня: 6.56 футаў (2 метра)
- LEDs per Meter: 320 LEDs/m (Total 640 LEDs)
- тtage: 5 В (пастаянны ток)
- Ватtage: 9.5 ват
- Светлавы паток: 1200 люмен
- Індэкс колераперадачы (CRI): >90
- Асаблівасці: 5V USB Powered, RF Remote Control, UL-Listed, Dimmable, Dotless, Flicker-Free, Memory Function, Timer
- Працягласць жыцця: >65,000 гадзін
- Рэйтынг абароны ад пранікнення (IP): IP30 (толькі для выкарыстання ў памяшканні)
- матэрыял: 3M Adhesive, COB LED Light Source, Double Layer Pure Copper PCB, Plastic
- Даўжыня кабеля сілкавання: 2.6 футы
- UPC: 717994811924
8. Гарантыя і падтрымка
PAUTIX is committed to customer satisfaction. This product comes with a Гарантыя 5 год, гарантуючы якасць і надзейнасць.
If you encounter any issues or have questions regarding your PAUTIX LED Strip Lights, please contact our customer support team. We aim to respond within 24 hours and provide a prompt resolution.
Кантактная інфармацыя: Please refer to the product packaging or the official PAUTIX webсайт, каб атрымаць найбольш актуальную кантактную інфармацыю службы падтрымкі кліентаў.
