Ansmann 1001-0143

ANSMANN BC 6-12V/2A Smart Charger Instruction Manual

1. Уводзіны

The ANSMANN BC 6-12V/2A Smart Charger is an intelligent, automatic 8-stage battery charger designed for safe and efficient charging of various 6V and 12V batteries. It is suitable for lead-acid, lead-gel, lead-fleece, and 12V LiFePO4 batteries with capacities ranging from 4 Ah to 60 Ah. This charger ensures optimal battery performance and extends battery life through its advanced charging process and comprehensive safety features.

У камплекце:

2. Налада і падключэнне

Before connecting the charger, ensure the charger is unplugged from the mains power supply. Select the appropriate connection method for your battery: battery clamps for temporary connection or ring terminals for a more permanent installation.

Этапы падлучэння:

  1. Connect the red positive (+) charger cable to the positive (+) terminal of the battery.
  2. Connect the black negative (-) charger cable to the negative (-) terminal of the battery.
  3. Пераканайцеся, што ўсе злучэнні надзейныя.
  4. Plug the charger into a suitable mains power outlet. The charger will automatically begin its initial checks.
ANSMANN BC 6-12V/2A Smart Charger with battery clamps, ring terminals, and power cable

Figure 1: ANSMANN Smart Charger with included accessories for various connection types.

Person connecting the ANSMANN charger to a car battery

Малюнак 2: Выпample of connecting the charger to a car battery using battery clamps.

ANSMANN charger connected to a motorcycle battery

Малюнак 3: Выпample of connecting the charger to a motorcycle battery.

3. Інструкцыя па эксплуатацыі

The charger features an 8-stage fully automatic intelligent charging process. Use the 'MODE' button to select the appropriate charging program and current for your battery.

Selecting Charging Programs:

Націсніце РЭЖЫМ button to cycle through the available charging programs:

For each program, you can select a charging current of either 1A or 2A. The LCD display will indicate the selected mode and charging status.

8-Сtage Automatic Charging Process:

The charger automatically progresses through the following stages to optimize battery charging and maintenance:

  1. Праверка батарэі: Assesses the battery's initial status and voltage.
  2. Дэсульфатацыя: Applies pulsed current and voltage to break down sulfate crystals on lead plates, restoring battery capacity.
  3. Аналіз: Temporarily halts charging to measure the battery's no-load voltage.
  4. Reactivation Charge: Prepares the battery for the main charge, resuming desulfation if necessary.
  5. Main Charge: Charges the battery with a constant current until it reaches a high state of charge.
  6. Charge Optimization: Gradually reduces the charging current to achieve maximum battery capacity.
  7. тtagэлектроннае кіраванне: Monitors the battery's charge status to ensure optimal voltagе ўзроўні.
  8. Holding Charge (Maintenance): Provides pulse maintenance charging as needed to prevent self-discharge and keep the battery fully charged.
Дыяграма, якая ілюструе 8-хtage charging process of the ANSMANN charger

Малюнак 4: Візуальнае прадстаўленне 8-хtage automatic charging process.

4. Тэхнічнае абслугоўванне

The ANSMANN BC 6-12V/2A Smart Charger is designed for durability and minimal maintenance. It is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. This allows for safe use in various environments.

The charger can remain connected to the battery for extended periods, providing a continuous holding charge to prevent self-discharge. This feature is ideal for vehicles stored for long durations, ensuring the battery remains fully charged and ready for use.

Periodically inspect the charger cables and connectors for any signs of damage or wear. Keep the charger clean and free from excessive dust or debris.

5. Troubleshooting and Safety Features

The ANSMANN Smart Charger incorporates multiple safety features to protect both the user and the battery during operation. If an issue occurs, the charger's LCD display may indicate an error or the charging process may not initiate.

Функцыі бяспекі:

ANSMANN charger in a wet environment, illustrating protection features

Figure 5: The charger's robust design and protection features, including splash water resistance.

ANSMANN charger connected to various battery types, highlighting defect detection

Figure 6: The charger's universal compatibility and defect detection capability.

Агульныя праблемы і рашэнні:

6. Тэхнічныя характарыстыкі

АсаблівасцьСпецыфікацыя
Нумар мадэлі1001-0143
Уваходны кнtageПераменны ток 100-240 В, 50/60 Гц
Выхад Voltage6 В / 12 В (пастаянны ток)
Ток зарадкі1A / 2A (па выбары)
Ёмістасць батарэі4 Аг - 60 Аг
Тыпы акумулятараўLead-Acid, Lead-Gel, Lead-Fleece, 12V LiFePO4
Зарадка Сtages8-Сtagе Аўтаматычная
Рэйтынг абароныIP65 (Dust and Splash Water Protected)
Памеры прадукту7.09 х 3.11 х 1.93 цалі (180 х 79 х 49 мм)
Вага прадмета1.03 фунта (0.47 кг)

7. Гарантыя

The ANSMANN BC 6-12V/2A Smart Charger comes with a 3-гадовая гарантыя вытворцы from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, unauthorized modifications, accidents, or normal wear and tear.

8. Падтрымка

For further assistance, technical support, or warranty inquiries, please contact ANSMANN customer service. You can find contact information on the official ANSMANN webна сайце або праз вашага прадаўца.

For more information about ANSMANN products, visit the Ansmann Store on Amazon.

Звязаныя дакументы - 1001-0143

прэview ANSMANN BC 6-12V / 6A Inteligentní nabíječka autobaterií Návod k obsluze
Návod k obsluze pro inteligentní nabíječku autobaterií ANSMANN BC 6-12V / 6A. Пакрыўная праграма, прылада, бяспека, рашэнне праблем і тэхнічныя характарыстыкі для батарэі 6V і 12V, AGM, гелавая і 12V LiFePO4 батарэя.
прэview Bedienungsanleitung ANSMANN POWERLINE 4 SMART Ladegerät
Umfassende Bedienungsanleitung für das intelligente ANSMANN POWERLINE 4 SMART Ladegerät zum Laden von NiMH- und NiCd-Akkus (AA/AAA). Enthält Informationen zu Funktionen, Sicherheit und technischer Spezifikation.
прэview Bedienungsanleitung: ANSMANN BC 6-12V / 10A Intelligentes Autobatterieladegerät
Umfassende Bedienungsanleitung für das ANSMANN BC 6-12V / 10A intelligente Autobatterieladegerät. Erfahren Sie mehr über die Funktionen, Sicherheitshinweise und Ladeprogramme für 6V und 12V Batterien.
прэview Кіраўніцтва карыстальніка хатняй зараднай прылады Ansmann HC120PD
User manual for the Ansmann Home Charger HC120PD, a USB-C PD charger designed for operating devices with a standard USB interface. Provides safety instructions, operation guidelines, technical specifications, and disposal information.
прэview ANSMANN Energy Check LCD Battery Tester - Operation Manual
Comprehensive operation manual for the ANSMANN Energy Check LCD battery tester. Learn how to test various battery types, interpret results, troubleshoot issues, and understand safety and disposal guidelines.
прэview Кіраўніцтва карыстальніка Bluetooth-калонкі ANSMANN BTS-MINI
Інструкцыя карыстальніка для партатыўнай Bluetooth-калонкі ANSMANN BTS-MINI, у якой падрабязна апісана ўстаноўка, функцыі, рэкамендацыі па бяспецы, воданепранікальнасць IPX7 і інфармацыя аб утылізацыі.