Уводзіны
This manual provides essential information for the proper identification, ordering, and use of your EasyKeys TS002 replacement key, designed for CompX National toolbox and cabinet locks. Please read these instructions carefully to ensure correct application and functionality.

выява: An EasyKeys TS002 replacement key, typically made of brass, designed for CompX National locks. This image shows the general appearance of the product.
Key Identification and Ordering (Setup)
To ensure you receive the correct replacement key, it is crucial to accurately identify your lock code. The EasyKeys TS002 key is specifically cut for CompX National locks with the TS002 code. Follow these steps to locate your lock code:

выява: A diagram illustrating common locations where a lock code can be found. This includes directly on the key (e.g., FR322), on the face of the lock cylinder (e.g., FR322), on a label inside or behind the lock mechanism (e.g., CODE: G38), or on a cabinet or door label near the lock (e.g., HF321).
Where to Find Your Lock Code:
- On the Key: The code may be stamped directly onto your existing key.
- On the Lock Face: The code can often be found engraved or printed on the visible face of the lock cylinder.
- On a Label Inside/Behind the Lock: For some locks, the code is on a sticker or label located inside the lock mechanism or on the surface it's mounted to, requiring removal of the lock or access to the interior of the cabinet/toolbox.
- On the Cabinet/Door Label: Occasionally, the lock code is provided on a label affixed to the cabinet or door itself, near the lock.
Important Notes for Ordering:
- Order by Manufacturer: Lock codes are specific to their manufacturer. Ensure your lock is a CompX National lock before ordering a TS002 key.
- Key Cuts Differ: Even if lock codes appear similar across different brands, the actual key cuts vary significantly. Always verify both the code and the manufacturer.
The EasyKeys TS002 key is compatible with CompX National locks in the TS001 - TS783 series, specifically for the TS002 code. It is cut on an RO7 D8783 key blank.
Інструкцыя па эксплуатацыі
Using your EasyKeys TS002 replacement key is straightforward:
- Уставіць ключ: Gently insert the key into the lock cylinder. Do not force the key.
- Пад ключ: Turn the key clockwise or counter-clockwise (depending on the lock mechanism) to engage or disengage the lock.
- Выдаліць ключ: Once the lock is operated, return the key to its original insertion position before removing it.
If the key does not turn smoothly, refer to the Troubleshooting section.
Тэхнічнае абслугоўванне
Proper maintenance will extend the life of your key and ensure reliable operation:
- Захоўваць у чысціні: Periodically wipe the key with a dry cloth to remove dirt or debris.
- Пазбягайце рэзкіх хімічных рэчываў: Do not use abrasive cleaners or solvents on the key, as this may damage the material.
- Захоўвайце належным чынам: Store the key in a dry place, away from excessive moisture or extreme temperatures.
- Lubrication (for lock): If the lock mechanism becomes stiff, apply a small amount of graphite lubricant specifically designed for locks, not oil-based lubricants, directly into the lock cylinder. This is for the lock, not the key itself.
Ліквідацыю непаладак
If you encounter issues with your replacement key, consider the following:
- Ключ не ўстаўляецца цалкам:
- Check for obstructions in the lock cylinder.
- Ensure the key is oriented correctly.
- Verify that the key code (TS002) matches your lock.
- Ключ устаўляецца, але не паварочваецца:
- Apply gentle, consistent pressure while turning. Do not force.
- The lock mechanism might be stiff or corroded. Consider applying a lock lubricant (graphite-based).
- Confirm the key code and manufacturer match your lock.
- Key Feels Loose or Wobbly:
- This may indicate wear in the lock cylinder or an incorrect key cut. Double-check your lock code and manufacturer.
If problems persist after troubleshooting, contact EasyKeys customer support for further assistance.
Тэхнічныя характарыстыкі
| Марка | EasyKeys |
| Назва мадэлі | TS002 |
| Compatible Manufacturer | CompX National |
| Тып замка | Cam Lock (Removable Core Locks) |
| Матэрыял | Латунь |
| Асаблівасці | Custom Cut Key, Durable |
| Памеры прадмета (Д х Ш х У) | 0.5 х 0.5 х 1 цалі |
| Вага прадмета | 0.25 фунта (прыблізна 4 унцыі) |
Гарантыя і падтрымка
This product is sold by EasyKeys Inc. USA. For any issues or support, please refer to the seller's return policy and contact information on the platform where the purchase was made.
- Палітыка вяртання: Typically, a 30-day return policy for refund or replacement applies. Please check the specific terms at the point of purchase.
- Падтрымка кліентаў: For assistance, please contact EasyKeys Inc. USA directly through the Amazon platform or visit their store page: EasyKeys Store.


