Уводзіны
This user manual provides detailed instructions for the installation, operation, and maintenance of your WALI Single Monitor Gas Spring Mount (Model: GSMP001N). This adjustable monitor arm is designed to enhance your workspace ergonomics and free up desk space by securely holding monitors ranging from 17 to 34 inches.
Please read this manual thoroughly before installation and use to ensure safe and optimal performance of your monitor mount.
Інфармацыя па бяспецы
Always ensure the monitor mount is securely attached to a stable desk surface. Do not exceed the maximum weight capacity of 26.4 lbs for flat screens and 19.8 lbs for curved screens. Improper installation or overloading can result in property damage or personal injury. Keep all small parts away from children.
- Verify your monitor's weight and VESA pattern (75x75mm or 100x100mm) before installation.
- Ensure your desk thickness is within the supported range (0.39"-2.76" for both clamp and grommet).
- Не перацягвайце шрубы, бо гэта можа прывесці да пашкоджанняў.
- Adjust the gas spring tension carefully to match your monitor's weight.
Змест пакета
Please check the package contents against the list below to ensure all components are present and undamaged.
- 1 x WALI Single Monitor Gas Spring Mount (Black)
- Mounting Hardware Kit (various screws, washers, hex keys)
- Кіраўніцтва карыстальніка (гэты дакумент)
Выява: Зверхуview of the WALI Single Monitor Mount, showing the gas spring arm, C-clamp base, and grommet mount base.
Настройка і ўстаноўка
1. Праверка сумяшчальнасці
Before proceeding with installation, ensure your monitor and desk meet the following requirements:
- Памер манітора: Fits most flat or curved LCD/LED screens from 17 to 34 inches.
- Вага манітора: Maximum load capacity of 26.4 lbs for flat screens and 19.8 lbs for curved screens.
- Шаблон VESA: Supports standard VESA mounting holes (75x75mm and 100x100mm).
- Таўшчыня стала: For both C-clamp and Grommet mount, desk thickness must be between 0.39 inches and 2.76 inches.
Image: Visual guide for checking monitor size, weight capacity, VESA mounting holes (75x75mm and 100x100mm), and desk thickness compatibility for both C-clamp and grommet mounting options.
2. Choose Mounting Option
The WALI Single Monitor Mount offers two installation methods: C-clamp and Grommet mount.
Image: Illustration of the C-clamp mounting method, which attaches to the edge of the desk, and the grommet mount method, which uses a hole in the desk.
C-Clamp Ўстаноўка:
- Прымацуеце C-clamp base to the edge of your desk.
- Зацягнуць клamp screw until the base is firmly secured to the desk.
- Insert the monitor arm pole into the C-clamp base and secure it with the provided screw.
Ўстаноўка люверсаў:
- If your desk has a grommet hole, insert the grommet base through the hole.
- Secure the base from underneath the desk using the provided washer and nut.
- Insert the monitor arm pole into the grommet base and secure it with the provided screw.
3. Падключэнне манітора
- Attach the VESA plate to the back of your monitor using the appropriate screws and spacers from the hardware kit. Ensure the screws are not overtightened.
- Slide the monitor (with the attached VESA plate) onto the monitor arm's VESA head.
- Secure the monitor to the arm by tightening the locking screw on the VESA head.
Эксплуатацыя і рэгуляванне
The WALI Single Monitor Mount offers full motion adjustability to achieve optimal viewing comfort and ergonomic positioning.
Рэгуляванне газавай спружыны
The gas spring allows for smooth height adjustment. If your monitor sags or floats, you need to adjust the gas spring tension. Use the provided hex key to turn the adjustment screw on the arm:
- Паварот clockwise (-) to reduce tension for lighter monitors (if the monitor floats up).
- Паварот counter-clockwise (+) to increase tension for heavier monitors (if the monitor sags down).
When adjusting, please place the arm in a horizontal level.
Image: Diagram showing how to adjust the gas spring tension and the tilt angle of the monitor arm for easy positioning without sinking.
Full Motion Capabilities
- Нахіл: Adjust the screen tilt from +70° to -45° to reduce glare and optimize viewныя вуглы.
- Паваротны: Swivel the monitor ±180° (360° total) to share your screen or change viewнага кірунку.
- Кручэнне: Rotate the monitor 360° between landscape and portrait orientations.
- Рэгуляванне вышыні: The arm allows for a height range of 5.1 inches to 17.3 inches above the desktop.
- Пашырэнне: Extend the monitor out up to 19.3 inches from the mounting pole.
Image: Detailed illustration of the monitor arm's full motion capabilities, including tilt (+70°/-45°), swivel (±180°), rotation (360°), and height/extension ranges (17.3" max height, 19.3" max extension).
Кіраванне кабелем
Utilize the integrated cable management clips on the arm to route and conceal your monitor cables, maintaining a clean and organized workspace.
Тэхнічнае абслугоўванне
To ensure the longevity and proper functioning of your WALI monitor mount, follow these simple maintenance guidelines:
- Уборка: Працірайце мацаванне мяккай сухой тканінай. Пазбягайце выкарыстання абразіўных ачышчальнікаў або растваральнікаў, якія могуць пашкодзіць пакрыццё.
- Перыядычныя праверкі: Перыядычна правярайце ўсе шрубы і злучэнні, каб пераканацца, што яны зацягнуты і надзейна закручаныя. Пры неабходнасці падцягвайце.
- Gas Spring: The gas spring is designed for long-term use. If you notice a change in its performance, re-adjust the tension as described in the "Operating and Adjustments" section.
Ліквідацыю непаладак
If you encounter any issues with your WALI Single Monitor Mount, refer to the common problems and solutions below:
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Monitor sags or drops | Нацяжэнне газавай спружыны занадта нізкае для вагі манітора. | Increase gas spring tension by turning the adjustment screw counter-clockwise (+). |
| Monitor floats up | Нацяжэнне газавай спружыны занадта высокае для вагі манітора. | Decrease gas spring tension by turning the adjustment screw clockwise (-). |
| Arm is difficult to move | Joints are too tight. | Loosen the hex bolts at the stiff joints slightly. |
| Monitor wobbles | Mount is not securely fastened to the desk or VESA plate is loose. | Пераканайцеся, што C-clamp/grommet mount is tightened. Check VESA plate screws and locking screw. |
Калі праблема не знікне пасля выкарыстання гэтых рашэнняў, звярніцеся ў службу падтрымкі кліентаў.
Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Нумар мадэлі | GSMP001N |
| Сумяшчальны памер манітора | 17 - 34 цалі |
| Weight Capacity (Flat Screen) | Макс. 26.4 фунтаў |
| Weight Capacity (Curved Screen) | Макс. 19.8 фунтаў |
| Сумяшчальнасць VESA | 75х75 мм, 100х100 мм |
| Desk Thickness (Clamp/Люстэрка) | 0.39 - 2.76 цалі |
| Кут нахілу | +70° / -45° |
| Кут павароту | ±180° |
| Кручэнне | 360° |
| Max Height (from desktop) | 17.3 цаляў |
| Максімальнае пашырэнне | 19.3 цаляў |
| Матэрыял | Метал |
| Колер | Чорны |
Гарантыя і падтрымка
WALI products are designed for durability and performance. While specific warranty details are not provided in this manual, WALI offers experienced and friendly US-based customer support available to assist 7 days a week.
For any questions, assistance with installation, or troubleshooting, please contact WALI customer support through the contact information provided on the official WALI webсайт або ваша платформа для пакупак.
Калі ласка, захавайце пацвярджэнне пакупкі для любых гарантыйных прэтэнзій або запытаў падтрымкі.
