Уводзіны
This manual provides essential information for the proper installation, operation, and maintenance of your SRAM Eagle AXS Pod Controller. Please read this manual thoroughly before using the product to ensure safe and efficient performance.
Figure 1: SRAM Eagle AXS Pod Controller
The SRAM Eagle AXS Pod Controller is an electronic bicycle shifter designed for precise and reliable gear changes. It features a compact design and intuitive controls for an enhanced riding experience.
Інфармацыя па бяспецы
- Always ensure all components are securely fastened before riding. Loose components can lead to loss of control and injury.
- Refer to a qualified bicycle mechanic for installation if you are unsure about any steps.
- Regularly inspect the controller and associated components for wear or damage. Replace worn or damaged parts immediately.
- Keep the controller and battery away from extreme temperatures and moisture.
- Do not attempt to disassemble or modify the controller, as this may void the warranty and cause malfunction.
Змест пакета
Праверце наяўнасць усіх прадметаў у камплекце:
- SRAM Eagle AXS Pod Controller (1 unit)
- Мантаж Clamp (for handlebar attachment)
- Батарэя CR2032 (папярэдне ўсталяваная або асобная)
- Кароткае кіраўніцтва па запуску (калі ёсць)
Настройка
1. Installation on Handlebar
- пазіцыянаванне: Determine the optimal position for the controller on your handlebar. The clamp-on mount allows for flexible placement.
- Укладанне: Адкрыйце мантажны клamp and place it around the handlebar. Secure the clamp using the provided bolt and a T25 Torx wrench. Tighten to the manufacturer's specified torque (refer to the quick start guide or SRAM's official documentation for exact torque specifications).
- Арыентацыя: Adjust the angle of the controller for ergonomic access to the buttons.
Figure 2: Controller mounted on handlebar
The image shows the SRAM AXS Pod Electronic Controller securely mounted on a bicycle handlebar, illustrating its compact design and button placement.
2. Pairing with AXS Components
The AXS Pod Controller must be paired with your SRAM AXS derailleur and other AXS components.
- Wake Up Components: Ensure all AXS components (derailleur, dropper post if applicable) are awake by pressing their AXS buttons briefly.
- Увайдзіце ў рэжым спалучэння: Press and hold the AXS button on the derailleur until the LED flashes slowly.
- Парны кантролер: Press and hold the AXS button on the Pod Controller until its LED flashes slowly.
- Пацвердзіць спалучэнне: Once both LEDs flash rapidly and then turn solid green, the components are paired. Repeat for any other AXS components.
Figure 3: SRAM AXS Pod Controller
This image displays the SRAM AXS Pod Controller, highlighting its design and the AXS branding, indicating its compatibility within the SRAM AXS ecosystem.
Інструкцыя па эксплуатацыі
Пераключэнне перадач
The AXS Pod Controller features two distinct buttons for shifting. By default, the upper button shifts to a larger cog (easier gear), and the lower button shifts to a smaller cog (harder gear).
- Up-shift (Easier Gear): Націсніце верхняя кнопка коратка.
- Down-shift (Harder Gear): Націсніце ніжняя кнопка коратка.
- Multi-shift: Hold down either button to shift multiple gears in succession. The number of gears shifted can be customized via the AXS app.
Customization with AXS App
For advanced customization, download the SRAM AXS app on your smartphone. The app allows you to:
- Reverse shift logic (upper button for harder gear, lower for easier).
- Adjust multi-shift settings (number of gears shifted per hold).
- Monitor battery levels of all AXS components.
- Update firmware for improved performance and features.
Тэхнічнае абслугоўванне
Уборка
- Працяры кантролер рэкламайamp тканінай, каб выдаліць бруд і пыл. Пазбягайце выкарыстання агрэсіўных хімікатаў або абразіўных ачышчальнікаў.
- Do not spray water directly into the controller or its buttons.
Замена батарэі
The AXS Pod Controller uses a CR2032 coin cell battery.
- Доступ да батарэйнага адсека: Locate the battery cover on the underside of the controller.
- Выдаліце старую батарэю: Use a small coin or flat-head screwdriver to gently open the cover and remove the old CR2032 battery.
- Устаўце новую батарэйку: Устаўце новую батарэю CR2032 станоўчым (+) бокам уверх.
- Бяспечнае пакрыццё: Replace the battery cover and ensure it is securely closed to maintain water resistance.
Заўвага: Утылізуйце выкарыстаныя батарэі адказна ў адпаведнасці з мясцовымі правіламі.
Ліквідацыю непаладак
| праблема | Магчымая прычына | Рашэнне |
|---|---|---|
| Кантролер не адказвае | Нізкі або разраджаны акумулятар | Заменіце батарэю CR2032. |
| Кантролер не адказвае | Not paired with AXS components | Perform pairing procedure as described in the Setup section. |
| Shifting is inconsistent or delayed | Перашкоды або слабы сігнал | Ensure no strong electromagnetic interference sources are nearby. Check battery levels of all AXS components. |
| Cannot customize settings via AXS app | Праблема з падключэннем Bluetooth | Ensure Bluetooth is enabled on your device. Bring your device closer to the bike. Restart the app and components. |
Тэхнічныя характарыстыкі
| Асаблівасць | Дэталь |
|---|---|
| Марка | SRAM |
| Назва мадэлі | 107603 |
| Нумар дэталі | 00.3018.313.002 |
| UPC | 710845891502 |
| Матэрыял | Кампазітны |
| Тып мацавання | Clamp-На гары |
| Вага прадмета | 0.25 фунта (прыблізна 0.11 кг) |
| Памеры прадмета (ДxШxВ) | 8 х 5.25 х 2.5 цалі (прыблізна 20.3 х 13.3 х 6.35 см) |
| Тып батарэі | CR2032 Манетная ячэйка |
| Сувязь | SRAM AXS Wireless Protocol |
Гарантыя і падтрымка
SRAM products are covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official SRAM webсайт або гарантыйны талон, які ўваходзіць у камплект пастаўкі вашага прадукту.
For technical support, troubleshooting assistance, or to locate an authorized service center, please visit the official SRAM support page: www.sram.com/en/sram/support
