VEVOR KD-C3022 4lbs Rock Polishing Kit

1. Уводзіны

Thank you for choosing the VEVOR KD-C3022 4lbs Rock Polishing Kit. This kit is designed to transform rough stones into beautifully polished gems, offering a quiet and efficient tumbling experience. Featuring a direct-drive motor, 9-speed settings, and a 9-day timer, this polisher is suitable for both beginners and experienced enthusiasts. Please read this manual thoroughly before operation to ensure safe and optimal use of your rock polishing kit.

Малюнак 1.1: Example of a rough stone before and after polishing with the VEVOR rock tumbler.

2. Інструкцыі па тэхніцы бяспекі

Заўсёды выконвайце асноўныя меры бяспекі пры выкарыстанні электрапрыбораў, каб знізіць рызыку пажару, паражэння электрычным токам і траўмаў.

• Прачытайце ўсе інструкцыі: Перад выкарыстаннем азнаёмцеся з правіламі эксплуатацыі і тэхнікай бяспекі.
• Электрабяспека: Пераканайцеся, што крыніца харчавання адпавядае аб'ёмуtage requirements of the polisher. Do not operate with a damaged cord or plug. Keep the power cord away from heat, oil, and sharp edges.
• Стабільная паверхня: Always place the rock polisher on a stable, level, and dry surface to prevent tipping or movement during operation.
• Захоўваць ачыстку: Падчас працы трымайце рукі, валасы, свабодную вопратку і ўпрыгажэнні далей ад рухомых частак.
• Кантроль: This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.
• Толькі для выкарыстання ў памяшканні: This product is designed for indoor use. Do not expose to rain or moisture.
• Адключайце прыладу ад сеткі, калі не выкарыстоўваецца: Disconnect the power cord from the outlet before cleaning, performing maintenance, or when the unit is not in use.
• Правільная вентыляцыя: Забяспечце дастатковую вентыляцыю вакол прылады падчас працы.
• Пазбягайце перагрузкі: Do not exceed the maximum load capacity of the barrel (4 lbs / 1.8 kg).
• Прадухіленне ўцечак: Ensure the barrel lid is securely fastened to prevent leaks during operation.

Малюнак 2.1: Safety features including anti-electric shock, overload protection, power failure memory, and a robust cold-rolled steel body for stable operation. The barrel also features a leakproof design.

3. Змесціва ўпакоўкі

Carefully unpack the box and ensure all items are present and in good condition.

• Rock Polishing Machine Base Unit
• Polishing Barrel (4 lbs / 1.8 kg capacity)
• Адаптар сілкавання
• Кіраўніцтва карыстальніка (гэты дакумент)

Note: Polishing grit and rough stones are typically sold separately and are not included in this kit.

4. Асаблівасці прадукту

• Матор з прамым прывадам: Belt-free design for enhanced durability, quiet operation (35 dB), and maintenance-free performance.
• 9-ступеністае кіраванне: Adjustable speed settings (1-9) for precise polishing tailored to different rock types and stagэс.
• 9-Day Timer: Programmable timer (1-9 days) for automated polishing cycles.
• Cold-Rolled Steel Body: Durable and stable base construction for long-term use without deformation.
• Памяць пры збоі харчавання: Automatically resumes operation from where it left off after a power interruption.
• Leakproof Barrel: High-sealing chamber prevents water leakage, keeping your workspace clean.
• Easy-Twist Lid: Improved curved lid design for secure and easy opening/closing.
• Накладкі супраць слізгацення: Ensures stability during powerful operation.

Малюнак 4.1: The upgraded direct drive motor offers quiet, efficient, and maintenance-free operation compared to traditional belt-driven systems.

5. Настройка

1. Распакуйце: Дастаньце ўсе кампаненты з упакоўкі.
2. Размяшчэнне: Place the rock polishing machine base unit on a firm, level, and dry surface. Ensure there is enough space around the unit for ventilation and operation.
3. Падключэнне сілкавання: Connect the power adapter to the machine and then plug it into a suitable electrical outlet.
4. Barrel Preparation: Ensure the polishing barrel is clean and dry before its first use.

Малюнак 5.1: Basic setup and operation steps for the rock polishing kit.

6. Інструкцыя па эксплуатацыі

The rock tumbling process typically involves multiple stages, each using a progressively finer grit. Always clean the barrel and rocks thoroughly between stages to prevent contamination.

6.1. Loading the Barrel

1. Дадаць камяні: Fill the polishing barrel with rough rocks. The barrel should be filled approximately 2/3 to 3/4 full. If you have fewer rocks, use ceramic media or plastic pellets to make up the volume. This ensures proper tumbling action.
2. Add Grit: Add the appropriate amount of coarse grit (e.g., 60/90 silicon carbide) for the first stage. Follow the grit manufacturer's recommendations for quantity.
3. Дадаць ваду: Pour water into the barrel until it just covers the rocks and grit. Do not overfill.
4. Seal Barrel: Securely fasten the barrel lid. Ensure it is tight to prevent any leakage during operation.
5. Place Barrel: Place the loaded barrel onto the rollers of the polishing machine.

6.2. Setting Timer and Speed

Малюнак 6.1: Control panel with timer and speed settings.

• Уключэнне: Націсніце Уключэнне/Выключэнне кнопка для ўключэння прылады.
• Set Timer (Days): Выкарыстоўвайце +/- Days buttons to set the desired tumbling duration, from 1 to 9 days. For the first stage (coarse grit), a typical duration is 5-7 days.
• Задаць хуткасць: Выкарыстоўвайце +/- Хуткасць buttons to select a speed setting from 1 to 9. A medium speed (e.g., 5-7) is often suitable for the initial coarse grit stage. Experiment to find the optimal speed for your rocks.
• Пачніце кувыркацца: Націсніце Пуск/Паўза button to begin the tumbling process. The barrel will start rotating.
• Паўза/Стоп: To temporarily pause the operation, press the Пуск/Паўза button again. To stop the operation completely, press the Уключэнне/Выключэнне кнопка.

6.3. Tumbling Stages (General Guide)

The following is a general guide. Specific grit types and durations may vary based on rock hardness and desired finish.

Important: After each stage, thoroughly clean the rocks and the barrel to remove all traces of the previous grit. Even a small amount of coarser grit can ruin the next polishing stage.

7. Тэхнічнае абслугоўванне

• Cleaning the Barrel: After each tumbling stage, thoroughly rinse the barrel and lid with water. Use a brush to remove any grit residue. Do not use harsh chemicals.
• Чыстка машыны: Wipe down the base unit with a damp cloth. Ensure no water enters the motor or electrical components. Do not immerse the base unit in water.
• Праверка роліка: Periodically check the rollers for any debris or wear. Clean them as needed to ensure smooth operation.
• захоўванне: When not in use, store the rock polisher in a clean, dry place, away from direct sunlight and extreme temperatures.
• Ceramic Particles: Ceramic particles used as filler or polishing media can often be recycled through multiple grinding stages, reducing waste.

8. Выпраўленне непаладак

9. Тэхнічныя характарыстыкі

Малюнак 9.1: Product dimensions of the VEVOR rock polishing kit.

10. Гарантыя і падтрымка

VEVOR products are designed for durability and performance. For specific warranty information, please refer to the warranty card included with your purchase or visit the official VEVOR webсайт.

If you encounter any issues or have questions regarding your VEVOR KD-C3022 Rock Polishing Kit, please contact VEVOR customer support. Our team is available to assist you with troubleshooting, parts replacement, and general inquiries.

Кантактная інфармацыя: Please refer to the VEVOR official website or your purchase documentation for the most up-to-date contact details.