1. Уводзіны і большview
The RADIOMASTER MT12 is an advanced open-source surface radio controller, designed for a wide range of RC surface models including cars, trucks, and boats. It is officially supported by EdgeTX, ExpressLRS, and the Multi-module project, offering extensive customizability and versatile operation.
This manual provides essential information for setting up, operating, and maintaining your MT12 controller to ensure optimal performance and longevity.
2. Асаблівасці прадукту
- Internal RF Modules: Available with built-in ExpressLRS or 4in1 Multi-Protocol (MPM) RF modules.
- Працэсар: Features a powerful STM32F407VGT6 with 1MB Flash.
- Аперацыйная сістэма: Preinstalled with EdgeTX firmware for advanced mixing and programmability.
- Зарадка: QC3.0 fast charging supporting 2.0A MAX via USB-C.
- Эрганоміка: Compact design with excellent ergonomics for comfortable handling.
- Батарэйны адсек: Oversized compartment supports 2 x 18650 cells or a 2S 7.4V 5000mAh battery pack (batteries not included).
- Модульны адсек: Standard Nano module compartment compatible with RadioMaster Ranger Nano Module, RadioMaster RM 4in1 module, and TBS Crossfire Nano module.
- Антэна: Rotatable antenna for optimized signal.
- Настройка: Customizable base switches or 4-way joystick included.
- Каналы кіравання: 16 channels as standard, expandable to 32 channels (4in1 only, requires additional 4in1 RF module and compatible receivers).
- Дысплей: 128x64 Monochrome LCD for clear information display.
- Датчыкі: Hall-effect wheel and trigger sensors for precise control.
3. Змесціва ўпакоўкі
- 1 x MT12 Surface Radio (4in1 Version)
- 1 x R85C Receiver
- 1 x Dual Switch Expansion module
- 1 x 4 Way Joystick Expansion module
- 1 x Nano Adapter
- 1 х кабель USB-C
- 1 x Leather Lanyard
- 1 x Custom RadioMaster signature carry case
- 1 x 18650 Battery Tray
- 1 х Пратэктар экрана
- 1 х налепкі
- 1 х Кіраўніцтва

This image displays the MT12 Surface Radio Controller along with its accessories, including the R85C receiver, dual switch and 4-way joystick expansion modules, Nano adapter, USB-C cable, leather lanyard, custom carry case, 18650 battery tray, screen protector, stickers, and the instruction manual.
4. Прадукт скончыўсяview
4.1 Кампаненты кантролера

This diagram illustrates the various parts of the MT12 controller, including the LCD screen, speaker, buttons (SYS, PAGE<, RTN, Power, PAGE>, MDL, TELE, SD), P1/P2 dials, T1/T2/T3/T4/T5 switches, SA/SB/SC buttons, handwheel, hand grip, lanyard loop, TYPE-C charge port, SD button, external module bay, antenna, throttle trigger, USB port, AUX port, 3.5mm headphone jack, DSC trainer port, trigger position adjustment, and trigger spring adjustment.

Гэта выява дае выразнае ўяўленне view of the front and left side of the MT12 controller, showcasing the screen, main control buttons, and the steering wheel.

This image highlights the right side of the MT12 controller, focusing on the steering wheel, throttle trigger, and accessible switches.

Тыл view of the MT12 controller shows the battery compartment cover and the USB-C charging port at the base.

This close-up image details the throttle trigger mechanism, including the screws for adjusting its position and spring tension.

Гэта выява дае падрабязную інфармацыю view of the MT12's monochrome LCD screen and the surrounding control buttons, which are used for menu navigation and settings adjustments.
4.2 Фізічныя памеры

The diagram shows the physical dimensions of the MT12 Surface Radio Controller: 177.8mm (height) x 118.4mm (width) x 207.8mm (depth).
5. Тэхнічныя характарыстыкі
5.1 MT12 Surface Radio
- Фізічныя памеры: 177.8 х 118.4 х 207.8 мм
- Вага: 480 грамаў
- Працоўная частата: 2.400-2.480 ГГц
- Унутраныя радыёчастотныя параметры: 4-у-1 мультыпратакольны / ELRS 2.4 ГГц
- Падтрымліваюцца пратаколы: Залежыць ад модуля
- Працоўны ток: 160mA for 4in1 / 320mA for ELRS
- Аператыўны Voltage: DC 6.6-8.4V
- Аперацыйная сістэма: EdgeTX
- Каналы кіравання: 16 standard, expandable to 32 (4in1 only)
- Дысплей: 128x64 Monochrome LCD
- акумулятар: 2 x 18650 cells or a 2S 7.4V 5000mAh battery pack (not included)
- Зарадка: Built-in USB-C Charging
- Абнаўленне прашыўкі: Праз USB або SD-карту
- Wheel and Trigger Sensor: Эфект Хола
- Модульны адсек: Памер нана (модуль RadioMaster Ranger Nano / модуль RadioMaster RM 4in1 / модуль TBS Crossfire Nano)
5.2 R85C Receiver (Included with 4in1 version)
- крыніца харчавання: Пастаянны ток 4.5 - 8.4 В
- Дыяпазон частот: 2400-2483.5 МГц
- Пратакол падтрымкі: D8/D16/SFHSS
- Выхадны канал: 5CH ШІМ
- Тып антэны: High-sensitivity 2.4G antenna
- Магутнасць тэлеметрыі: 100 мВт / 20 дБм
- Вага: 5.7 грамаў
- Памеры: 31.0 х 18.5 х 13.0 мм
6. Настройка
6.1 Устаноўка батарэі
The MT12 controller uses 2 x 18650 cells or a 2S 7.4V 5000mAh battery pack. Ensure correct polarity when inserting batteries into the provided tray or connecting a LiPo pack.
6.2 Прывязка прымача
To establish communication between the MT12 controller and the R85C receiver, a binding process is required. Refer to the detailed steps in the included manual for your specific receiver type (R85C or ER3C-i).
For receivers with built-in gyro functionality, ensure the gyro is activated and configured correctly after binding. The sensitivity of the gyro can often be adjusted via a potentiometer on the receiver or through the controller's menu.
This video illustrates how to activate and configure the gyro function on a compatible receiver. It covers switching the receiver to gyro mode, checking the gyro phase, and adjusting sensitivity. While the video features a Radiolink receiver, the principles for gyro setup are generally applicable to the MT12's R85C or ER3C-i receivers.
7. Аперацыйная
7.1 Basic Controls and Adjustments
The MT12 controller features a standardized button layout for intuitive operation. The LCD screen provides real-time information and access to various settings. Use the navigation buttons and dials to adjust parameters such as steering trim, throttle trim, dual rates, and exponential curves.
This video showcases the features and menu system of a similar advanced RC transmitter. It highlights aspects like internal battery design, USB-C interface, trainer mode support, and customizable UI. While not the MT12, it offers insights into the capabilities and user experience of modern RC controllers.
This video provides a visual demonstration of the MT12 Surface Radio Controller, showcasing its design, button layout, and key features like the EdgeTX operating system, internal RF modules, Hall sensors, and customizable inputs. It offers a good visual reference for the controller's capabilities.
7.2 Advanced Settings (EdgeTX)
The EdgeTX firmware allows for advanced programming, including:
- Памяць мадэлі: Store up to 30 different model configurations.
- Dual Rates (D/R): Adjust the maximum travel of steering and throttle channels.
- Exponential (EXP): Fine-tune the sensitivity around the center stick position for smoother control.
- ABS Braking: Program an Anti-lock Braking System to prevent wheel lock-up during hard braking, improving control.
- Channel Reversing: Reverse the direction of any channel to match your servo setup.
- End Points (EPA): Set the maximum travel limits for each servo.
- Тэлеметрыя: Аб'ём батарэі манітораtage, signal strength (RSSI), and other data from compatible receivers.
This video offers an in-depth look at the features and menu system of the Flysky FS-G11P transmitter. It covers aspects like design, controls, battery installation, and menu navigation for various settings such as reversing channels, adjusting end points, and setting up ABS braking. While a different brand, the demonstrated functionalities are common in advanced RC controllers like the MT12.
8. Тэхнічнае абслугоўванне
- Уборка: Regularly clean the controller with a soft, dry cloth. Avoid using harsh chemicals or solvents.
- захоўванне: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
- Абнаўленні прашыўкі: Periodically check the RADIOMASTER website for firmware updates to ensure optimal performance and access to new features. Updates can be performed via USB or SD card.
- Сыход за батарэяй: Follow proper charging and discharge procedures for your chosen battery type (18650 cells or LiPo pack) to maximize battery life and safety.
9. Выпраўленне непаладак
- Няма харчавання: Check battery installation and charge level. Ensure the power switch is in the ON position.
- Няма праблем з сігналам/прывязкай: Re-perform the binding procedure. Ensure the receiver is powered on and within range. Check for interference.
- Incorrect Servo Movement: Verify channel reversing and end point settings in the EdgeTX menu. Check servo connections.
- Gyro Malfunction: Ensure the gyro is correctly enabled and its phase is set according to the car's movement. Adjust gyro sensitivity as needed.
- Кантролер не рэагуе: Attempt a factory reset if persistent issues occur (refer to the full manual for factory reset procedures).
10. Гарантыя і падтрымка
Please refer to the instruction manual before use for detailed warranty information and support contacts. For technical assistance or warranty claims, contact RADIOMASTER customer support or your authorized dealer.





