Tedeligo Wireless Dimmer Switch 3-in-1 with Remote Control

1. Уводзіны

This manual provides detailed instructions for the installation, operation, and maintenance of your Tedeligo Wireless Dimmer Switch. This 3-in-1 system includes a wireless remote control transmitter and three dimmer control modules, designed for 220-250V AC circuits. It allows for remote brightness control of LED and halogen lamps ranging from 10W to 150W, and is compatible with existing wall dimmer switches without requiring Wi-Fi connectivity.

2. Інфармацыя па бяспецы

• Электрычная небяспека: Installation must be performed by a qualified electrician or in accordance with local electrical codes. Ensure power is disconnected at the circuit breaker before installation.
• тtage: This device operates on 220-250V AC. Do not connect to other voltagэлектронныя сістэмы.
• Грузападымальнасць: Do not exceed the maximum load of 150W for LED and halogen lamps. Overloading can cause damage or fire.
• Сумяшчальнасць: Only use with compatible LED and halogen lamps. Refer to the compatibility section for details.
• Асяроддзе: The dimmer module has an IP00 rating, meaning it offers no protection against dust or water ingress. Install in a dry, protected environment.
• Тэхнічнае абслугоўванне: Do not attempt to repair or modify the device. Contact support for assistance.

3. Змесціва ўпакоўкі

Праверце, ці ёсць усе прадметы ў вашай упакоўцы:

• 1 x Wireless Remote Control Transmitter (with base)
• 3 x Dimmer Control Modules
• 1 х Кіраўніцтва прадукту
• Злучальныя правады
• Двухбаковая клейкая стужка
• Шрубавыя аксэсуары

4. Асаблівасці прадукту

• Бесправадное кіраванне: Control light brightness remotely without Wi-Fi.
• Рэжымы падвойнага кіравання: Operate via the original wall switch (with reset button) or the wireless remote transmitter.
• Extended Control Range: Stable control distance of up to 30 meters indoors and 50 meters outdoors, effective even through walls.
• Гнуткі кантроль: Up to 20 wireless remote transmitters can control a single dimmer module. The remote features 5 independent channels (01-05) to control multiple dimmer modules without interference.
• Шырокая сумяшчальнасць: Suitable for 10-150W LED and halogen lamps.

5. Кіраўніцтва па ўстаноўцы

5.1 Электрычная схема

Ensure power is OFF before proceeding with any wiring. Connect the dimmer module according to the diagram below. The module should be installed within a standard electrical box or a suitable enclosure.

5.2 Mounting the Dimmer Module

The compact design of the dimmer module allows it to be placed behind an existing wall switch or inside a ceiling rose. Use the provided double-sided adhesive tape or screw accessories for secure mounting.

5.3 Спалучэнне пульта дыстанцыйнага кіравання

To pair the remote control with a dimmer module:

1. Ensure the dimmer module is powered on.
2. Press the pairing button on the dimmer module (usually a small button on the side or top, refer to the module itself for exact location). The indicator light on the module will blink.
3. Within 5 seconds, press any button on the remote control. The indicator light on the module will stop blinking, indicating successful pairing.
4. Repeat for additional dimmer modules if necessary, assigning each to a different channel on the remote if desired.

6. Інструкцыя па эксплуатацыі

6.1 Выкарыстанне пульта дыстанцыйнага кіравання

The wireless remote control allows for convenient adjustment of light brightness.

• Кнопка харчавання: Націсніце, каб уключыць або выключыць святло.
• Brightness Up/Down: Use the dedicated buttons to increase or decrease light intensity.
• Выбар канала: The remote has 5 channels (01-05). Use the channel selection button to cycle through channels and control different dimmer modules independently.

6.2 Using the Original Wall Switch

After installing the dimmer module, your existing wall switch (if it has a reset button) can also control the dimming function. A quick press will toggle ON/OFF, while a long press may initiate dimming, depending on the switch type.

6.3 Multi-Channel Control

The remote control's 5 channels allow you to manage up to 5 different dimmer modules or groups of modules independently. Simply select the desired channel (01-05) on the remote before adjusting the light.

7. Сумяшчальнасць

This dimmer switch is designed for use with 10-150W LED and halogen lamps. It is compatible with various common bulb types as illustrated below.

8. Тэхнічнае абслугоўванне

• Уборка: Wipe the remote control and dimmer module with a dry, soft cloth. Do not use liquid cleaners or solvents.
• Замена батарэі: The remote control uses a 12V battery. Replace it when the control range decreases or the remote becomes unresponsive. Ensure correct polarity when replacing.
• Асяроддзе: Трымайце прылады далей ад экстрэмальных тэмператур, вільготнасці і прамых сонечных прамянёў.

9. Выпраўленне непаладак

10. Тэхнічныя характарыстыкі

11. Гарантыя і падтрымка

Каб атрымаць інфармацыю аб гарантыі і тэхнічнай падтрымцы, звярніцеся да дакументацыі, якая пастаўляецца з пакупкай, або звярніцеся да прадаўца. Захоўвайце пацвярджэнне пакупкі для любых гарантыйных прэтэнзій.