BYD MTED01 Central Computing Platform Instruction Manual

BYD MTED01 Central Computing Platform Instruction Manual

БЫД-ЛАГАТЫП

BYD MTED01 Central Computing Platform

BYD-MTED01-Central-Computing-Platform-PRODUCT

Hardware system block diagram

BYD-MTED01-Central-Computing-Platform (3)

Архітэктура сістэмы

  • The main functions of the host system:
  • USB
  •  Сотавы:
  • UMTS (B/2/4/5/)
  • Quad-band GSM/GPRS solution
  • GSM (850/1900)
  • LTE band:(B/2/4/5/7/12/13/14/17/25/26/38/40/41/66/71) 5GNR:n2/n5/n7/n38/n41/n66/n71/n77/n78/)

Падключэнне:

  • BT: 2400MHz-2480MHz;BT5.0
  • WLAN: Frequency: 2.4GHz: 2.412-2.484 GHz; 5GHz:5.18GHz-5.845GHz; IEEE802.11a/b/g/n/ac/ax/be

GNSS:

  • GPS: 1575.42MHZ±1.023MHZ
  • Galileo 1575.42MHZ±1.023MHZ
  • Radio: AM/FM/DAB
  • FM 64 МГц-108 МГц
  • AM 520-1710 кГц
  • DAB 174-240 МГц
  • ВК-дысплей
  •  Сістэма камер
  • Microphone and audio equipment

Асноўныя кампаненты

SOC

  • МТК8678
  • ARM v9.0,1xARM XP-core,1xARM P-core,1xARM E-core
  • LPDDR5X@8533MT/s
  • USB2.0,DisplayPort 1.4
  • UFS3.1 Gear4 2xlanes
  • 3xDP 1.4,2xDSI DPHY1.2&CPHY1.2,4xeDP1.4b
  • NR sub6, LTE Cat19, UMTS DC-HSPA+ R8+, GSM/GPRS/EDGE, CDMA2000

ADAS SOC:

  • Orin-X
  •  ARM v8.2,12xARM Cortex-A78AE cores
  • Ampere Architecture GPU,CUDA cores, Ray-tracing (RT )cores and Tensor cores
  • FSI,4xARM Cortex-R52 lock-step cores
  • 1x shared HDMI v2.1/DP v1.4a/eDP v1.4
  • 6 MIPI CSI-2 v3.0 links
  • 4xUSB2.0DSP
  • AK7709: Highly integrated DSP, including 8 stereo channels and 4 SRC support up to 192kHz sampling rate, and integrating 6 DSPs for voice and audio processing.
  • HiFi4a/HiFi4b:64-bit ,491.52MHz,MAC(Quad/Octal), ALU(4x64bits), IRAM0/IRAM1/DRAM1/Audio Buffer
  • 77DSP1/2: 37-bit ,491.52MHz,Multiplier/Divider/ALU,PRAM(12k)/CRAM(16k)/DRAM(8k)/DLRAM(48k)
  •  77DSP3/4: 37-bit ,491.52MHz,Multiplier/Divider/ALU,

MCU

  • U2A16
  •  CPU, 4 RH850 core/4 Lock-step core
  • Total RAM 3584KB; Code Flash 16MB
  • 16CANFD/10SPI/2I2C/24UART
  •  1SGMII
  •  94ADC
  •  ASILD

ETH

  •  MARVELL 88Q5192
  • 4 x 100/1000BASE-T1PHYs
  • 2 x 100/1000BASE-T1/TXPHYs
  • 2 x RGMII/xMII
  • 2 x 2.5G SerDes(SGMII/1000BASE-X/2500BASE-X)
  • 2 x 10G SerDes with XFI
  • 2 x PCIe(8Gbps Gen 3×1 Lane)

GSM/UMTS/LTE/NR

  •  This product adopts a hardware solution composed of MT8678, and combines it with the MT6199 radio frequency baseband chip to form a complete system suite.
  • • The tested equipment (EUT) supports the following frequency bands:
  • • UMTS (B/2/4/5/)
  • • Quad-band GSM/GPRS solution
  • • GSM(850/1900)
  • • LTE band:(B/2/4/5/7/12/13/14/17/25/26/38/40/41/66/71)
  • • 5GNR:/n2/n5/n7 /n38/n41/n66/n71/n77/n78/)

Антэна:

  • Тып антэны: Знешняя антэна
  • Імпеданс: 50 Ом
  • Modulation methods: GMSK, 8-PSK, QPSK, 16QAM
  • Operating temperature range: -40°C ~ 85°C

 WLAN і Bluetooth

  • The central control unit uses a BT/WLAN dual-module (MT6653 chip from MediaTek) to achieve connection, and is equipped with an external antenna. It supports WLAN/BT 2.4 GHz and WLAN 5 GHz respectively.
  • In the above figure, connector M13 is the WLAN/BT antenna port: WLAN 5 GHz, WLAN 2.4 GHz and Bluetooth share the same antenna. When conducting WLAN/BT radio frequency conduction tests, SMA radio frequency cables need to be used to connect these ports.
  • MT6653 supports the IEEE 802.11 a/b/g/n/ac/ax/be WLAN standard and integrates Bluetooth functionality.
  • Bluetooth 5.4, compliant with basic rate, EDR and BLE
  •  frequency: 2,402 – 2,480 GHz modulation: GFSK, p/4-DQPSK, 8DPSK

WLAN:

  • Standard: IEEE 802.11 a/b/g/n/ac/ax/be
  • Frequency: 2.4GHz: 2.412-2.462 GHz; 5GHz:5.18GHz-5.825GHz
  • Modulation: CCK,DBPSK,DQPSK,BPSK,QPSK,16QAM,64QAM,256QAM,1024QAM,4096QAM
  • Power: < 20dBm

Малюнак

ПАМЕРЫ

BYD-MTED01-Central-Computing-Platform (2)

Выбухнуў view

BYD-MTED01-Central-Computing-Platform (3)

Заява FCC

Змены або мадыфікацыі, не ўхваленыя асобай, адказнай за захаванне патрабаванняў, могуць ануляваць права карыстальніка на эксплуатацыю абсталявання. Гэта прылада адпавядае частцы 15 правілаў FCC. Эксплуатацыя ажыццяўляецца пры выкананні двух наступных умоў:

  1. Гэта прылада не можа выклікаць шкодных перашкод і
  2. Гэта прылада павінна прымаць любыя атрыманыя перашкоды, у тым ліку перашкоды, якія могуць выклікаць непажаданую працу.

УВАГА: Гэта абсталяванне было праверана і прызнана адпаведным абмежаванням для лічбавых прылад класа B у адпаведнасці з часткай 15 Правілаў FCC. Гэтыя абмежаванні прызначаны для забеспячэння разумнай абароны ад шкодных перашкод у жылых памяшканнях. Гэта абсталяванне генеруе, выкарыстоўвае і можа выпраменьваць радыёчастотную энергію і, калі не ўстаноўлена і не выкарыстоўваецца ў адпаведнасці з інструкцыямі, можа выклікаць шкодныя перашкоды радыёсувязі. Аднак няма ніякай гарантыі, што перашкоды не будуць узнікаць пры пэўным усталяванні. Калі гэтае абсталяванне стварае шкодныя перашкоды радыё- або тэлевізійнаму прыёму, што можна вызначыць, выключыўшы і ўключыўшы абсталяванне, карыстальніку рэкамендуецца паспрабаваць ліквідаваць перашкоды адным або некалькімі з наступных мер:

  • Пераарыентуйце або перамесціце прыёмную антэну.
  • Павялічце адлегласць паміж абсталяваннем і прымачом.
  •  Падключыце абсталяванне да іншай разеткі, чым тая, да якой падключаны прыёмнік.
  •  Пракансультуйцеся з прадаўцом або дасведчаным радыё-/тэлетэхнікам, каб атрымаць важную інфармацыю

Заява аб уздзеянні радыяцыі

  • Гэта абсталяванне адпавядае абмежаванням радыяцыйнага ўздзеяння FCC, устаноўленым для некантраляванага асяроддзя.
  • Гэта абсталяванне павінна быць устаноўлена і эксплуатавана з мінімальнай адлегласцю 30 см паміж радыятарам і вашым целам.
  • Гэты перадатчык не павінен размяшчацца або працаваць у спалучэнні з любой іншай антэнай або перадатчыкам.

Для FCC&IC 5.2G выкарыстоўваецца толькі ў памяшканні.

Адмова ад адказнасці

  • The information contained in this document is the proprietary information of BYD Auto Industry Company Limited.
  • The contents are confidential and any disclosure to persons other than the officers, employees, agents or subcontractors of the owner or licensee of this document, without the prior written consent of BYD, is strictly prohibited.
  • BYD makes every effort to ensure the quality of the information it makes available. Notwithstanding the foregoing, BYD does not make any warranty as to the information contained herein, and does not accept any liability for any injury, loss or damage of any kind incurred by use of or reliance upon the information.
  • BYD disclaims any and all responsibility for the application of the devices characterized in this document, and notes that the application of the device must comply with the SAFETY standards of the applicable country, and where applicable, with the relevant wiring rules.
  • BYD reserves the right to make modifications, additions and deletions to this document due to typographical errors, inaccurate information, or improvements to programs and/or equipment at any time and without notice. Such changes will, nevertheless be incorporated into new editions of this document.
  • Аўтарскае права: Перадача, капіраванне, распаўсюджванне і/або рэдагаванне гэтага дакумента, а таксама выкарыстанне яго зместу і паведамленне яго іншым асобам без відавочнага дазволу забароненыя. Парушальнікі будуць несці адказнасць за кампенсацыю шкоды. Усе правы абаронены.
  • The vehicle-mounted computing platform VCPB-AD10 is a new-generation vehicle domain control host developed by BYD, integrating intelligent driving and cabin functions. It is planned to be sold in various target markets. Regarding communication and wireless access, the platform supports the following functions: Bluetooth, WiFi, GNSS, FM, AM, 2G/3G/LTE/NR, etc.
  • This platform will be manufactured by BYD’s Huizhou factory.

Дакументы / Рэсурсы

PDF thumbnailMTED01 Central Computing Platform
Instruction Manual · MTED01, MTED01 Central Computing Platform, MTED01, Central Computing Platform, Computing Platform, Platform

Задайце пытанне

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Задайце пытанне

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.