ELEGOO спецыялізуецца на даступных, высакаякасных 3D-прынтарах, смалавых матэрыялах і наборах STEM-робататэхнікі на базе Arduino для вытворцаў і аматараў па ўсім свеце.
One of the most recognized names in consumer 3D printing, ЭЛЕГОО is a technology company dedicated to open-source hardware research, development, and production. Based in Shenzhen, the brand is widely acclaimed for its accessible and reliable MSLA resin printers, such as the Марс і Сатурн series, as well as its Няптун line of FDM printers. ELEGOO aims to lower the barrier to entry for digital fabrication, providing geeks and creators with the keys to a new world of manufacturing.
Beyond additive manufacturing hardware, ELEGOO offers a comprehensive ecosystem of post-processing tools like the Mercury wash and cure stations, along with high-quality photopolymer resins and filaments. The company is also a major provider of STEM education kits, including Arduino-compatible smart robot cars and electronic starter modules, fulfilling their mission to "Create the Future" by empowering users to build almost anything through programming and technology.
Апошнія інструкцыі ад manuals+ спецыяльна распрацаваны для гэтага брэнда.
Глядзіце відэа па ўсталёўцы, наладзе і ліквідацыі непаладак для гэтай маркі.
Распаўсюджаныя пытанні аб інструкцыях, рэгістрацыі і падтрымцы гэтага брэнда.
If a print fails, clean any excess cured resin from the resin tank and replace the resin if necessary. Ensure the release film is not whitened, scratched, or lacking elasticity, as this can increase failure rates.
Yes, ELEGOO printers support water-washable resin. When using this type of resin, you can use water (instead of isopropyl alcohol) to clean your models.
Heat the nozzle to 230°C and manually push the filament through to remove the clog, or use a fine needle to clear the nozzle tip while it is heated.
Keep the LCD screen clean using a soft cloth and 95% or higher ethyl/isopropyl alcohol. If resin drips onto the screen, clean it immediately to prevent damage. Replace the protective tape or release film if they become aged or damaged.
Yes, ELEGOO provides a warranty on their machines and parts. Consumable parts like release films typically have no or limited warranty, while the main 3D printing machines usually carry a 12-month warranty. Check the official warranty policy for specific details per model.