igloo SK4 Lockbox Installation Guide

igloo SK4 Lockbox

Тэхнічныя характарыстыкі

• Гідраізаляцыя IP66
• IK-07 level impact protection
• Supports both battery and DC power
• Backlit physical keypad
• algoPIN technology for remote access

Што ўключана

• Скрыня для замка
• Крапежныя шрубы
• Шрубавыя якары
• Screw O-Rings
• Батарэі ААА
• Вечка батарэі
• Ахоўнік захоўвання
• Відэльцы

Што вам трэба

Прывітанне! Пачаць тут

Этапы ўстаноўкі

Мантаж з дапамогай шруб

• Open the lockbox lid and take out all of the items inside.
• Find a place to install your Lockbox. Installing it closer to your locks and entryway will enable easier operation.

Крок 1: Адзначце мантажныя адтуліны
Tear off & tape the drill sheet where you would like to install the lockbox and mark the locations of the 4 x pilot holes.

Крок 2: Прасвідруйце накіравальныя адтуліны

ВАЖНА
To ensure secure installation, use the recommended pilot hole and anchor bolt guidelines below.

Drill the pilot hole size for the mounting surface as specified. Note if Anchor Bolts are required.

The pilot holes should be drilled to a depth of 50mm / 2″.

Step 3: Insert Anchors (if required)
Insert the 4 x screw anchors (C) for Brick, Concrete, Masonry or Drywall if required. The anchors should tightly fit into the pilot holes to ensure a secure hold.

Step 4: Access Mounting Holes
Remove the 4 plugs (H) & storage guard (G) to access the mounting holes.

Крок 5: Замацуеце шрубамі
Align the lockbox to the prepared holes and insert the screws (B) with a screwdriver in a clockwise twisting motion. Use the rubber O-rings (D) as shown if exposed to wet conditions.

Step 6: Replace Storage Guard
Replace the storage guard (G) and snap it into place.

Крок 7: Устаўце батарэі

• Open the battery cover (F) and insert the 4 x AAA (E) batteries as indicated. Close the battery cover.
• For temps below -20C (-4F) use LiMn02 AAA batteries for optimal battery life.

Крок 8: Зачыніце вечка
Close the lid firmly and the lockbox should automatically lock after 3 seconds with a green Status LED.

Step 9: Test Unlocking
Unlock the lockbox with the default pin by entering the code 1234567890.

Віншую!
You have installed your lock. Download the igloo home application from the App Store or Google Play Store to complete setup & configure your smart lock.

Асаблівасці

• Вялікая прастора для захоўвання
  Ample interior storage to protect more than just keys such as cards, ID badges, fobs, remotes, asset tags, small tools & more.
• Rugged Outdoor Security
  Built to protect with IP66 waterproofing, IK-07 level impact protection, a secure locking mechanism & tampэр трывогі.
• View Device Activity Logs
  View all access activity by credential used, and view the battery life in the IGH mobile app.
• Лёгкая ўстаноўка
  Supports both battery and DC power for flexibility in low- or high-traffic areas. The compact design makes it easy to retrofit or install in new builds without complicated wiring.
• Backlit Physical Keypad
  Large, easy to press, tactile buttons built for reliable PIN code entry and readability in direct sunlight or pitch black conditions.
  Access from Anywhere a igloo PIN technology helps you generate a PIN code from anywhere and share it with anyone for instant access.
• Apple Watch Convenience
  Use your Apple Watch to unlock via voice, a finger tap or gestures. Works with watch OS 7 and up.
• Аўтаматычная разблакіроўка
  Your lockbox automatically unlocks when you return home. Never fumble with keys again.
• Relock Reminder
  Intuitive audio and visual alerts will prompt you to recharge the batteries when it runs low.
• Блакаванне бяспекі
  Disable the keypad after several incorrect access attempts to ensure your property is always secure.
• PIN-код Decoy
  Павысьце бяспеку і адштурхніце назіральнікаў, увёўшы выпадковыя лічбы перад сапраўдным PIN-кодам.
• Сігнал аб перашкодах
  The lock will sound an alarm if the bolt tongue cannot be extended or retracted fully to alert the user of any obstructions.
• Абвестка пра нізкі зарад батарэі
  Intuitive audio and visual alerts will prompt you to recharge the batteries when it runs low.
• Аўтаблока
  Automatically locks once the lockbox is shut to give you greater peace of mind.
• Tamper Сігналізацыя
  The lock will sound an alarm if the lid is opened without unlocking to alert and deter potential tampспробы іравання.
• Аварыйны Jumpstart
  Easily jumpstart the reader with a Type-C cable connected to a power bank or compatible phone if battery is drained.
• Рэгулятар гучнасці
  Адрэгулюйце гучнасць блакавання ў адпаведнасці з вашымі перавагамі. Выберыце ад узроўняў ад 0 (адключэнне гуку) да 5 (самы гучны).

Audio and LED Indicators

Ліквідацыю непаладак

• I have placed the batteries inside but the device won’t turn on.
  Check that the batteries have been inserted in the correct orientation. There should be two long, and two short beeps when the batteries are installed correctly. If it still doesn’t work, try a new set of AAA 1.5V batteries.
• I am unable to see the device when trying to pair
  Ensure that the device is receiving power by pressing any button to wake it up. Waking it up will allow it to be seen in the app when pairing.
• The batteries have fully drained. How can I replace them?
  Connect a 5V DC power source via Type – C USB cable. The device will wake up, you can now enter a permanent pin code such as the master pin or use the app to unlock. Once unlocked, ensure that a fresh set of batteries have been inserted before closing.

FAQ