PIZZELLO Rectangular Dining Table Instruction Manual

PIZZELLO Rectangular Dining Table

Тэхнічныя характарыстыкі

• Designed for durability, weather resistance, and low maintenance
• Падыходзіць for both indoor and outdoor spaces
• Дыяпазон тэмператур: -104 to -140 (-40 to 60)
• Час зборкі: Да 30 хвілін

Інструкцыя па ўжыванні прадукту

Спіс дэталяў:

List of parts A-N with quantities and sizes.

Неабходныя інструменты:

• Шасцігранны ключ (у камплекце)
• Open-end wrench (Provided)

Інструкцыя па зборцы

• крок 1: Connect panel E and panel D using screw G and nut N. Ensure correct connection by checking for 4 silver screw heads in the middle of the table.
• крок 2: Assemble parts C, Cupright, F, and L screws as instructed.
• крок 3: Continue assembling part F with part B using L screws.
• крок 4: Attach the connected B and C parts to the tabletop using screw J.
• крок 5: Connect part A with parts B and C using screws J and H. Secure with screw H from the inside.

Patio Bistro Chair

• Follow the labeled legs for the front side indication
• Assemble on a flat surface to avoid scratches
• Do not dispose of the original box until you confirm the product
• Contact after-sales service for product return

УВОДЗІНЫ

• Thank you for choosing our rectangular dining table! This table is designed for durability, weather resistance, and low maintenance, making it a great addition to both indoor and outdoor spaces.
• To ensure long-lasting use and maintain its quality, please read and follow the usage precautions below.

Меры засцярогі пры выкарыстанні

УВАГА

• Тэрмаўстойлівасць: The table can withstand temperatures between -104℉ to -140℉ (-40℃to -60℃）. Avoid placing high-temperature objects (such as grills or hot pots) directly on the surface to prevent damage. Using heat-resistant mats is recommended.
• Пазбягайце працяглага знаходжання на сонца: While our table is weather-resistant, extended exposure to strong sunlight may cause fading or slight warping. Covering the table with a cloth or protective cover when not in use is advised.
• Прадухіляць Драпіны: Avoid using sharp objects such as knives directly on the table surface to prevent scratches.

НЕАБХОДНЫЯ ІНСТРУМЕНТЫ

ПАТРАБАВАННІ ДА ЗБОРКІ

Спіс дэталяў

ІНСТРУКЦЫЯ МАНТАЖЫ

1. Крок 1
   • Use screw G and nut N to connect panel E and panel D.
   • Заўвага: If part E is correctly connected, you will see the 4 silver screw heads in the middle of the table.
   • Please check it before installing.
   • A) If part E is correctly connected, you will see the 4 silver screw heads in the middle of the table.
   • B) If part E is incorrectly connected, you will see the 4 silver screw heads on the side of the table, and you will have a problem on the next step.
2. Крок 2
   1. Stand parts C and Cupright at a 90-degree angle to the ground or easier installation.
   2. Insert one end of part F into part C, align the holes, and secure it with two L screws.
3. Крок 3
   • Insert the other end of part F into part B, align the holes, and secure it with two L screws
4. Крок 4
   • Attach the connected B and C parts to the tabletop using screw J.
5. Крок 5
   • Use screws J and H to connect part 2 (A) parts with parts B and C.
   • (Secure with screw H from the inside)
   • Secure with screw H from the inside

PATIO BISTRO CHAIR

Паважаны кліент,

• Дзякуй, што абралі наш прадукт. Калі ласка, уважліва прачытайце гэтую інструкцыю перад зборкай або выкарыстаннем прадукту, каб пазбегнуць пашкоджанняў, выкліканых няправільным выкарыстаннем.
• Калі прадукт перадаецца трэцім асобам, гэта кіраўніцтва павінна быць перададзена разам з прадуктам. Па любых пытаннях не саромейцеся звяртацца да нас.

НЕАБХОДНЫЯ ІНСТРУМЕНТЫ

ПАТРАБАВАННІ ДА ЗБОРКІ

СПІС ЧАСТКІ

• Fasten screws loosely during initial assembly. Do not firmly tighten screws until step 7.

Інструкцыя па зборцы

• Парады: We have labeled the legs to indicate which side is the front side.
• However, the factory sometimes mislabeled them. Please check with the picture before installing; the straighter side should be the front side.

УВАГА

• When installing, we suggest you can assemble the product on the flat carton which comes with the product, or any other clean floor to avoid the product surface being scratched.
• Please do not dispose of the original product box until you confirm you received the complete and correct item.
• If you want to return the product, you are suggested to contact our after-sales service first. You need to pack the returned product with the original box and then follow the steps to return it.
• Крок 1: Connect the beam (E) and the left front leg (A). Use the screw (G) and nut (F) to connect them.
• Please don’t tighten the screws yet.
• Крок 2: Connect the beam (E) andthe  Right Front Leg (B). Use the screw (G) and nut (F) to connect them.
• Please don’t tighten the screws yet.
• Крок 3: Attach the chair seat (C) to the Left Front Leg (A) and the Right Front Leg (B).
• Please make sure you attach the seat from the correct direction.
• крок 4: Use the 4 scresw (G) and 4 nuts (F) to connect them.
• Крок 5: Remove the 2 protective cases on the seat (C).
• Крок 6: Assert the seat back (D) to the seat (C).
• Крок 7: Закруціце ўсе шрубы і гайкі.

How To Replace The Back And Seat

• A: Slowly take apart the back of the back frame.
• B) Slowly take apart the seat from the seat frame.
• Заўвага: When replacing the new seat and back, make sure you assemble them from the correct direction. The edge with round angle should face outside.

FAQ