Кіраўніцтва карыстальніка ThinkNode G3 LoRaWan Gateway

Шлюз ThinkNode G3 LoRaWan

Інструкцыя па ўжыванні прадукту

Запчасткі прылад

1. Reload Button
2. Порт Type-C: 5 В/1 А
3. Ethernet Port (10Mbps/100Mbps)
4. SIM Card Socket (Only 4G Version)
5. Святлодыёд стану LINK
6. Індыкатар стану LoRa
7. PWR Status LED
8. Антэна LoRa
9. 4G Antenna (Optional)

Product LED Status

1. When the device is powered on, the red LED remains solid.
2. During data transmission, the blue LED blinks.
3. After the device is connected to Wi-Fi or Ethernet, the green LED remains solid.

Спіс запчастак

• ThinkNode-G3 x1
• LoRa antenna x1
• 4G antenna (Only 4G Version) x1
• USB-A to USB-C data cable x1
• База х1
• Шруба x3
• Кіраўніцтва карыстальніка x1

Wi-Fi Setup Steps

1. Power on the device, press and hold the Reload button for 5 seconds, then release. The device will enter the gateway configuration mode, and the green LED(LINK) will blink. Use a computer to connect to the gateway’s Wi-Fi network.
   (ThinkNode-G3_xxxxxx),With the password: 88888888.
2. Open a browser and enter 192.168.4.1 to access the gateway configuration page:
   • NET MODE: WIFI
   • WIFI SSID: Enter the Wi-Fi name you want to connect to (non-5GHz Wi-Fi network)
   • WIFI PASS: Enter the password for the Wi-Fi network you want to connect to
   • Gateway ID: xxxxxxffffexxxxx
   • SERVER ADDR: eu1.cloud.thethings.network (default)
   • SERVER PORT: 1700 (default)
   • REGION: EU868/US915/AU915 (Select according to the actual frequency band)
   • CHANNEL: * (Choose according to the frequency of the connected device)
   • SF:  (Choose according to the frequency of the connected device)
   • TIME ZONE: UTC
3. Click Submit to save the configuration settings. The gateway will automatically reboot, and the green LED (LINK) will turn off temporarily, then remain solid.

Ethernet Setup Steps

1. Connect the Ethernet cable to the device and power it on, press and hold the Reload button for 5 seconds, then release. The device will enter the gateway configuration mode, and the green LED(LINK) will blink. Use a computer to connect to the gateway’s Wi-Fi network (ThinkNode-G3_xxxxxx), with the password: 88888888.
2. Open a browser and enter 192.168.4.1 to access the gateway configuration page:
   • NET MODE: NET
   • SSID WIFI:
   • WIFI PASS:
   • Gateway ID: xxxxxxffffexxxxx
   • SERVER ADDR: eu1.cloud.thethings.network (default)
   • SERVER PORT: 1700 (default)
   • REGION: EU868/US915/AU915 (Select according to the actual frequency band)
   • CHANNEL: * (Choose according to the frequency of the connected device)
   • SF:(Choose according to the frequency of the connected device)
   • TIME ZONE: UTC
3. Click Submit to save the configuration settings. The gateway will automatically reboot, and the green LED (LINK) will turn off temporarily, then remain solid.

Этапы ўстаноўкі базы

Асноўныя характарыстыкі

FAQ

What is the ThinkNode G3 LoRaWAN Gateway?
The ThinkNode G3 is an industrial-grade LoRaWAN gateway that connects LoRa-based sensors and devices to cloud-based applications using Ethernet, Wi-Fi, or cellular (4G LTE) backhaul.

What are the supported connectivity interfaces?
The ThinkNode G3 supports:

• Ethernet (RJ45)
• Wi-Fi (2.4 ГГц)
• 4G LTE (optional model)
• LoRaWAN (ISM sub-GHz)